1. Oscilloscope 4-channel 1 GHz DSO 9104A (Agilent Technologies)
Main characteristics
- The analog signal bandwidth of 1 GHz.
- Rise time of 300 ps.
- Coefficient of isolation between channels 40 dB.
- Bit 8-bit vertical.
- Bit vertical (when averaged) 12-bit.
2. Thermovision camera Ti32 (Fluke)
Main characteristics
- Measured temperature range from -20 to 600°С.
- Temperature accuracy – 2°С.
- Sensitivity (at 30°С) – 50 mK.
- The field of view of the main – 23° x 17°.
3. pH meter portable ANION 7000
Main characteristics
- Measuring an electromotive force (EMF) and the redox potential (Eh):
- in the range from – 1 200 to +1 200 mV;
- with a resolution of 1 mV;
- with an accuracy of 2 mV.
- Measuring the activity of hydrogen ions (pH):
- from 0 to 14;
- in increments of 0.01;
- with an accuracy of 0.02.
- Measuring the activity of the ions of nitrogen trioxide (pNO3):
- ranging from 1 to 6;
- in increments of 0.01;
- with an accuracy of 0.05.
- measurement of the temperature of water environments:
- ranging from 0°C to 100°C;
- with a resolution of 0.1°C;
- with an accuracy of 0.3°C.
- System provided avtotermokompensatsii (ATC):
- from 0 to 60°C;
- with an accuracy of 0.04 units.
4. Discovery Semi-Micro Analytical Balances DV-215CD (Ohaus)
Main characteristics
- Weight cup of chemically resistant steel.
- The possibility of determining the density of substances (hydrostatic weighing), the function of dynamic weighing.
- Number 2 weighing ranges:
- from 0 to 81 g, graduation 0.01 mg;
- from 0 to 210 g, graduation 0.1 mg.
- Accuracy class according to GOST 24104-1988: I.
- Accuracy class according to GOST 24104-2001: I.
- Integrated full self-calibration weights.
Information on the manufacturer's website
5. Laboratory centrifuge Sigma 2-16P (Sigma Laborzentrifugen)
Main characteristics
- Maximum capacity in a swing-out rotors: 4 vials of 120 ml.
- The maximum speed of 15 000 rpm/Min.
- Ability to work at a low speed of 100 rev/Min.
- The system of protection of rotor imbalance.
- The noise level at maximum speed 67 dB.
6. Modular data acquisition system and the automation
Main characteristics
- - 8-slot chassis for PXIe-1082 8-Slot 3U PXI Express Chassis – 2 pcs.;
- - Chassis 5-slot NI PXIe-1073 Integrated MXIe, 5 Periph Slot, ExpressCard, 3 m Cable – 3 pcs.;
- - Controller NI PXIe-ExpressCard8360, ExpressCard MXI for PXI Express, 3 m Cable – 2 pcs.;
- - Multimer NI PXI-4070 6 1/2 Digit FlexDMM (1.8 MS/s Digitzer, 300 V, 1 A) – 2 pcs.;
- - Digital multimer NI PXI-4072 6 1/2 Digit FlexDMM and LCR Meter – 1 pcs.;
- - A module for thermocouple NI PXIe-4353 32-Channel, 24-bit, 80S / s Thermocouple Input Module, NI-DAQmx Driver, and LabVIEW SignalExpress LE – 2 pcs.;
- - Interface USB D-sub NI USB-232/4 – 3 pcs.;
- - RS-232 PXI NI PXI-8430/4 – 3 pcs.;
- - Map data acquisition NI PXIE-6251 M SERIES MULTIFUNCTION DAQ DEVICE AND NI-DAQMX DRIVER SOFTWARE – 3 pcs.;
- - Power NI PXI-4022 – 2 pcs.;
- - Stepper Motor Controller NI PXI-7344 4-Axis Stepper / Servo Motion Controller – 2 pcs.;
- - Stepper Motor Driver P70360 Stepper Drive, 120 or 240 VAC powered, 2.5 A continuous current, 1 axis – 2 pcs.;
- - High-speed generator NI PXI-6733 – 1 pcs.
7. Discotom-6 cut-off machine
Discotom-6 is a high performance table-top cut-off machine with a strong 3.7 kW (5.0 HP) motor. It is designed for cut-off wheels with a diameter of 250 mm (10"). Discotom-6 can be operated both automatically and manually, making it suitable for a wide range of applications.
Main characteristics
- - Ability to cut both manual and automatic modes.
- - Electronic control of the feed rate.
- - Ability to set cut-off wheels with a hole diameter of 32 mm (for use available in the laboratory cutting discs) and the outside diameter of 250 mm.
- - Cut Capacity: samples with a diameter of 80 mm or sections up to 140 mm x 65 mm.
- - Built-cutting table.
- - The speed of rotation of the cutting disc – 2 850 rev/min.
- - Special flexible sidebar for cutting long workpieces, protruding from the cutting chamber.
- - The system of coolant on the cutting blade during the cutting process.
- - Device for installing and fixing the samples. The maximum width of the clamp 50 mm.
- - Vertical clamping system. For clamping on the cutting table irregularly shaped parts up to 60 mm.
- - Recirculation cooling system with a tank volume of 50 liters and the static filter block with replaceable filter paper.
Information on the manufacturer's website
8. Semi-automatic grinding and polishing machine Tegramin-25
The Tegramin preparation system elegantly combines ease of use with advanced functionality. lnnovative solutions improve preparation results and help you deal with a variety of specimens or materials, or high specimen volume. Used for treatment (grinding and polishing) of solid samples for optical studies.
Main characteristics
- - Grinding and polishing disc diameter of 250 mm.
- - Controllable drive speed range from 40 to 600 rev/min in increments of 10 rev/min.
- - Possibility of manual and automatic processing of the sample.
- - Speed grinding and polishing devices - from 50 to 150 rev/min in steps of 10 rev/min, given by the direction of rotation clockwise and counter-clockwise.
- - Ability to process individual samples and samples in the holders.
- - Adjustable force of 5 N to 65 N for a single sample and 30 to 400 N holder.
- - Built-in cooling system disk.
- - Built-in dosing suspensions (6 and 1 pump, respectively, for the diamond and oxide suspensions for the entire cycle of grinding and polishing.
- - Pressure water pumps produced in the range from 1 to 10 bar.
- - Integrated control system with LCD touch screen with backlight.
- - Supply air by the compressor capacity of 150 l/h. The air pressure of 6 to 10 bar.
- - Ability to connect the machine to the Internet.
- - Feeder samples rotatable and removable sample holder 6 of diameter 25 mm.
