The complex includes:

1. Scanning electron microscope Hitachi S-3400N analytical device – convenient and easy to use scanning electron microscope. The device is equipped with detectors of secondary (SE) and backscattered (BSE) electrons, automated table system and automatic settings. The use of consoles EDX, WDX and EBSD gives information about the elemental composition and crystal structure (for crystalline samples).

The device is designed to study solid, non-magnetic, resistant to low pressures of samples.

Characteristics of the microscope:

Characteristics of the analytical device:

Spectrometer Inca Wave 500 System for the wave analysis (WDX):

EBSD AzTek HKL Channel 5 with the Advanced with FSD detectors, AZTEC HKL and Channel 5 – a set of hardware and software for the analysis of texture and structure of materials.

The index of the phases of both high and low symmetry, the analysis of materials with pseudosymmetry.

Mapping of polycrystalline samples for the determination of orientation.

Flexible and powerful application of texture analysis using the methods of pole figures, inverse pole figures, the distribution functions of orientation/disorientation in Euler space, etc. for any crystalline materials (all 11 Laue groups).

A wide selection of databases of crystallographic information.

Mapping velocity (while indexing) to 106 points per second.

The software package AzTEC and INCA intended for processing the results of the elemental analysis and the diffraction of backscattered electrons.

Device for spraying Leica EM SCD050 with quartz detector for the deposition of conductive coatings on samples for electron microscopy.

2. Microscope Leica DM4500 P – polarization research microscope to study solid polished materials for work in reflected and transmitted light. Used in geological and material science fields.

Characteristics

Lighting system with 100W halogen lamps by Keller with automatic configuration provides the optimum conditions of illumination with a constant color temperature depending on the lens and research method.

Revolver for 5 lenses with the independent alignment of each. Increase of installed objective lenses: 5x, 10x, 20x, 63х, 100x allow the study of sample with a magnification of 50-1000x. All lenses from Leica.

Polarizers for transmitted and reflected light, swivel (360 degrees) extendable. Integrated pull-out tripod lens for additional magnification factor of 1.6 x. Bertrand Lens, integrated tripod mount with a separate focusing mechanism.

Precision rotary table with automatic clamping through 45 degrees from any given position with mechanical system of moving the sample with fixation every 2mm, allowing to determine the position on the sample with an accuracy of 0.1 mm.

Digital camera Leica DFC 495 with an 8-megapixel CCD is designed for fast retrieval of high resolution images.

Advanced intuitive scanning in SXGA resolution provides up to 18 frames per second (FPS) and allows you to customize and focus the sample directly on the computer screen. The presence of Peltier cooling reduces the noise level when working with images in low-light conditions.

Software Leica Application Suite specially designed for microscopes and digital cameras from Leica is designed for obtaining the photomicrographs. The software package contains tools for camera configuration and partial configuration of a microscope color image correction, measurement of linear sizes of objects in the frame.            

3. Spectrophotometer Evolution 201

Modern computerized spectrophotometer, allow carrying out photometric measurements of solid and liquid objects in the radiation range of 190-1100 nm.

User-friendly design and the software allow you to quickly and accurately perform assigned scientific tasks.

 

4. The particle size analyzer DynaSizer ANALYSETTE 12

The particle size analyzer ANALYSETTE 12 DynaSizer is designed based on a patented innovative technology developed by the Institute of Petroleum (France), and is a unique instrument for measuring particle size from nano - to micro-size in the liquid phase. Can be used to measure from 1 to 6000 nm in a wide concentration range: 0.0003-40% vol. The device is based on the principle of photon correlation spectroscopy, also called dynamic light scattering. The calculation is based on the theory of dynamic light scattering. The ratio of the Stokes-Einstein for the Brownian motion of molecules, calculates the diffusion coefficients DZ by:

 

Original optical design eliminates the use of cuvettes, which greatly facilitates operation. DynaSizer ANALYSETTE 12 is able to measure even in dark and concentrated solutions. The analyzer measures the actual distribution of particle sizes with small sample quantities and in an extremely wide range of concentrations. In the study of minimal sample volume (less than 0.5 ml), thin-layer analysis allows to prevent local overheating of the sample and multiple scattering of light passing through it laser. The photon trap is installed in the device allows you to protect the sample from excess absorption of the transmitted light.

Specifications:

5. Calorimeter TAM II 

Isothermal calorimeter (TAM II TA Instruments consists of a highly stable oil thermostat, embedded computer and 4 channels with up to 24 devices simultaneously. TAM II has a maximum set of used calorimeters and currently it is the most flexible and productive device in its class, at the same time allowing to carry out measurement with high sensitivity and accuracy. The operating modes include isothermal, step-isothermal and slow scanning.

In the thermostat device used mineral oil for the fastest possible absorption of excess heat and minimize temperature gradients in the system. The effective circulation of the liquid also contributes to accurate temperature change on the program. The average temperature fluctuation in the calorimeter does not exceed the value of 10 µk in the range from 15 to 150°C. the temperature Drift is not larger than 100 µk in 24 hours. This stability provides a high detection sensitivity of the thermal effects of both fast and slow current processes, making the device convenient to study the stability of materials in storage, materials compatibility, detection of reactions and studying their kinetics.

Operating modes:

Isothermal - this is the traditional mode of use of the device TAM II. It's also a classic mode of the experiment in microcalorimetry. In this mode, the thermostat maintains the temperature of the system constant throughout the experiment, and any thermal effects associated with a chemical or physical process in the sample are continuously recorded. Isothermal measurements provide quantitative and continuous information reflecting the speed of the studied processes.

Stepwise isothermal is a mode in which the sample is sequentially isothermal stages at different temperatures. Stability and sensitivity under isothermal stages is the same as in the isothermal mode. When the temperature changes the heat flow is recorded in order to determine the effect of temperature changes on the condition of the specimen. Mode is useful to study the heat capacity and temperature dependence of chemical reactions.

The type of calorimeter: microcalorimeter, 20 ml. Designed for work with glass or steel ampoules with a volume of 20 ml. In the device TAM II can be set to 4 microcalorimeters 20 ml. noise Level <100 NW. Drift in the baseline <200 нВт / 24 h. Microcalorimeter can be used in conjunction with devices of dissolution, titration, flow calorimetry.

6. Thermostat liquid ET 20 S

LAUDA thermostats keep the temperature at a constant level up to 5 thousandths °C, or purposefully changing it in the range from 150°C to 400 °C. bath from transparent polycarbonate plastic allows you to observe the studied objects in the process of temperature control. A thermostat with a bath from polycarbonate, with a volume of 18 liters, are used in the temperature range from 20°C to 100°C. the Shaker-thermostat are equipped with a cooling coil. Clearly structured control panel, which consists of three buttons and a large led display that provides simplified navigation through menu and easy control of the thermostat. 

Specifications

Protection system provides the power when overheating, when a low fluid level, when you lock the pump and possible failure of the electronics and ensures maximum reliability and safety of operation even when working with flammable liquids. Temperature protection against overheating is exhibited by trimming resistor, and its value is displayed on the indicator. Thanks to the automatic self-test, a fault message appears on the display accompanied by a sound signal. Heating thermostat shaker is great for temperature control of measuring equipment such as refractometers, density meters, calorimeters, rotary capillary viscometers. The thermostat is widely used in laboratory practice in the study of isothermal solubility of different samples like synthetic origin and natural objects – rocks, natural minerals and their synthetic analogs; biological and medical research, quality control materials, calibration of the temperature sensors and in the manufacture of electronic components. The problem of temperature control, for example, liquid chromatography, electrophoresis or temperature control microbiological or chemical facilities.

7. X-ray fluorescence spectrometer SPECTROSCAN max-G

The spectrometer is designed to determine the content of elements ranging from Ca to U in the substances being in solid, powdered, dissolved, and also applied on surfaces or precipitated on the filters.

The spectrometer operation principle is based on irradiation of the sample by primary radiation x-ray tube, measuring the intensity of secondary fluorescent radiation from the sample at wavelengths corresponding to specific elements, and then calculating the mass fraction of these elements in a pre-constructed calibration characteristic representing the dependence of the content of the element from the measured intensity.

The secondary fluorescent radiation is decomposed into a spectrum using a crystal analyzer. Due to this, the spectrometer has a high capacity for separation of spectral lines, and hence the possibility of accurate analysis of complex multi-component substances.

The spectrometer is a benchtop unit with an external computer. The spectrometer consists of spectrometric unit, equipped with low-power x-ray tube cross-type, air cooled. 

The composition of hardware for experimental modeling of mineral forming processes are also part of auxiliary equipment for sample preparation for separation of the mineral fractions, grinding of samples to analytical fineness, preparation of images for electronic microscopy and microanalysis:

Jaw crusher Pulverisеtte 1

Mill planetary Pulverisеtte 7

Polishing machine Buehler AutoMeth / EcoMeth 250

8. Raman spectrometer Horiba Jobin-Yvon LabRam HR800 used for registration of spectra of Raman scattering. A main aims are identification of the studied substances in solid, liquid or gaseous states, phase diagnostic of inclusions in minerals, assessment of the degree of crystallinity of the substance, studies the transformation of substances in the chemical and electrochemical reactions, studies of changes in biological tissues. A built-in microscope allows to obtain information with micrometer objects. Confocal optical scheme enables the most  detailed images and analyses to be obtaibed with speed and confidence. The spectrometer is equipped by attenuated total reflection (ATR) infrared module.

Features

9. Thermo Scientific Nicolet 6700 FT-IR spectrometer with NXR FT-Raman accessory module is intended for investigations of organic, non-organic, metal-organic substances, polymers, catalysts by methods of infrared and Raman spectroscopy.

Features